Send Email 0508 UNIPRO (864776)
| Item | Specification |
| Related power supply |
100-110/200-220V AC 50/60 Hz, ( FLRP 301 200-220V / 415V AC 50/60 Hz.) |
| Used voltage range | Within -15 to +10% of rated voltage |
| Ambient temperature | -10 to +55°C (No freezing or condensation) |
| Relative humidity | 45 to 85% RH |
| Output contact capacity | 250V AC 5A (resistance load) 250V AC 2A (induction load) |
| Tolerance | 100,000 times or more electrically, 10 million times mechanically) |
| Insulation resistance | 100M ohm or more (500V DC Megger) |
| Withstand voltage | 1500V AC/1 min. (excl. between electrode circuits) 1000V AC/1 min. (between contact terminals) |
| Item |
Specification | |
| Power consumption |
FLR501 FLR502, 503 FLR204, 206 FLRP301 |
Approx 3VA Approx 6VA Approx 10VA Approx 2VA |
| Material, colour |
ABS plastic ( ivory / black) |
OPERATION RESISTANCE
| Type | Operator resistance | Recovery resistance | Interelectrode voltage |
Electrode cable length |
| Standard type |
4k Ohm or more |
15k Ohm or less |
7 to 9V AC |
600mm or less |
| High-sensitivity |
70k Ohm or more |
300k Ohm or less |
40m or less | |
| Long distance |
1k Ohm or more |
4k Ohm or less |
2km or less |
PRODUCT LIST
| Model |
Application |
Compliant electrode holder |
Approximate weight (g) |
| FLR 501 | Automatic standard water-supply/water discharge operation | HS3B |
280/280 |
| FLR 502 | 1) Automatic water-supply operation with pump idle prevention 2) Automatic water-supply operation with abnormal low-water supply alarm |
HS3B (pair) HS4B or HF4 |
440/440 |
| FLR 503 | Automatic water-discharge operation with abnormal low-water supply alarm | HS3B |
440/440 |
| FLR 505 | Liquid level display and alarm | HS3B |
440/440 |
| FLR 204 | Automatic water-supply/water-discharge operation with full tank/low-water supply alarm |
HS5B or HF5 |
720 |
| FLR 206 | Automatic water-supply operation with water supply source/tank level display and pump idle prevention |
HS5B or HF5 HS4B or HF4 |
1050 |
| FLRP 301 | Automatic standard water-supply/water- discharge operation (compact plug-in) | HS3B |
150/160 |
| Remark: |
of type name indicates specified option code (H:high-sensitivity type, L:Long-distance type) |
EXTERIOR
TYPE FLR501, FLR502, FLR503, FLR505, FLR204, FLR206, FLRP301 (Complete with socket)
FLOATLESS RELAY (Accessories)
There are 2 types of electrode holders:
screwed-in type and flange type. The screwed-in type 2-inch pipe electrode section can be removed easily. Furthermore, the unit can also be used as a flange-type when attaching the electrode holder HSHS.
| Screwed-in type | Type name | Approximate weight (g) |
| 3 poles | HS 3B | 180 |
| 4 poles | HS 4B |
- |
| ELECTRODE HOLDER | Flange-type |
| 4-pole flange type (type name: HF4) | Approximate weight : 430g |
ELECTRODE ROD
| Product |
Type name | Approx. weight (g) |
| For connection, complete with locknut and joiner (as shown) |
PB2 |
165 |
CERAMIC SEPARATOR
The separator is used to avoid contact between electrodes when coupling them for use.
| HS3B separator (type name: FS3) | HS4B/5B separator (type name: FS5A) |
| Approximate weight: 35 g | Approximate weight: 25g |
IMMERSION ELECTRODE
Stainless steel (SUS304), 165mm length. Combined with ground electrode and detection electrode, it is optional for use in deep wells. Maximum of 100m cable (10m unit) is available.
| Product name | Type name | Approx. weight (g) |
| With 1 m cable | HI 201 | 130 |
| With 5 m cable | HI 205 | - |
| With 10 m cable | HI 210 |
- |
| External dimensions (unit mm), external diagram |
VCTFO:
|